Knowledge is the Key

When you invest in Fastlane turnstiles from Smarter Security, you’ve chosen a premium, advanced entrance control solution. To fully optimize your investment, Smarter Security offers site certification and training to ensure maximum product knowledge and peace of mind.

Site Certification & Training

Smarter Security offers Site Certification and Training which extends the standard one-year parts warranty by two years for a total of three years, with an additional option of purchasing up to five years warranty.

Expertise

Certified field technicians
Friendly knowledgeable staff
Specialized Fastlane diagnostic and repair skills

Support

Technical support available 24/7
Lifetime remote support on every product
Available on-site technician visits

Savings

Reduced downtime
Predictable budgeting
Lower total cost of ownership

Site Certification

Peace of Mind

Site Certification service ensures a technician is on-site to verify that your turnstiles have been installed correctly and that there are no issues with the equipment or configuration upon start-up. Additionally, the technician trains the integrator and end-user security manager on proper usage of the system to certify that the equipment is being used as intended.

Verify proper installation, wiring, and integration with access
control and fire alarm systems.
Assist in establishing customer use cases (card-in, free egress,
etc.).
Confirm all lane status lights and alarm sounders are functioning.
Align and adjust all barriers.
Provide turnstile operational training to end-users.
Provide turnstile technical training to integrators.

Pre-site Certification Checklist

To ensure installation is ready for Site Certification, all projects are required to complete and submit Smarter Security’s Pre-Site Certification checklist. To complete online, please enter your site information, and click the Next button.

To download a copy of our Pre-Site Certification checklist and submit later, click the Download button below.

DOWNLOAD

* Document needs to be downloaded directly to the desktop and filled in to submit electronically.

Remember, all installations are required to submit a checklist before a technician can schedule departure.

Integrator *

Integrator Contact Name*

Contact Email *

Mobile Phone *

End User- Company *

Site Address *

Site City *

End User- Contact *

End User- Contact Email *

Configuration (e.g. 2 sets of 3 lanes) *

Turnstile Model *

Note: Requested Commissioning date needs to be at least 2 weeks lead time from the time of request.

Request Commissioning Date * (mm/dd/yyyy)

1. Report any damages, missing items, or discrepancies, such as glass height or turnstile customizations. In the event of a problem, contact Smarter Security immediately support@smartersecurity.com

2. Mount and orient pedestals correctly, as described in installation manual. See transmit beam orientation (TX->INT->RX). Arrows to be pointing in the same direction. Arrows located at the base of the turnstile chassis.

3. Install power supplies external to turnstiles and wire for AC voltage, as instructed in the manual.

Note: Pedestals must be grounded. Power supplies are NOT to be shared with any other devices or daisy-chained to other pedestal PCBs.

4. Run wire gauge from power supply modules to turnstiles. Suggestion: 0-50' / 18awg. 50-100' / 16awg. 100-200' / 14awg. 200+ / contact us.

5. Run and connect CAT5 interconnect communication cables from RX pedestal CPU REM OUT to TX pedestal interface board REM IN for each lane. Refer to the installation manual for correct CAT5 terminations.

6. Terminate input & output controls on CPU to meet customer requirements for access control (e.g. card in/card out, remote consoles, fire relay). Refer to the installation manual for correct input/output termination.

7. What readers are connected to the turnstile?

8. Have the readers been installed and tested?

9. Will there be end user training?

10. Is there a remote console for the lanes?

Notes for open action items or site requirements such as PPE, safety training.

I acknowledge that all tasks have been completed and information is accurate to the best of my knowledge.

Note: If circumstances are different upon arrival and excess time is required on-site, the customer will be billed for incremental expenses incurred in addition to a daily rate for each incremental day that results from inconsistencies.

Comments

24937

"From pre-sale engineering through certification training [to the] delivery of product, technical support, and site certification–Smarter was on the job and stayed with us all the way to ribbon cutting."

E.J. Young, Integrator, Bernhard Brothers Mechanical Contractors, LLC

Training

Our flexible and comprehensive technical training program is designed around our customer’s needs, from product introduction and demonstration to setting configuration and safety. Our expert trainer will be on hand to answer all your questions.

Features:

A comprehensive inspection of how the lanes are wired
Review lane features and settings
Demonstrate gate breakaway features, alarms, and actions
Reader usage, authorized versus unauthorized entry, and traffic flow
Common mistakes
Review the use of remote consoles
and much more…

Preventative Maintenance

Our preventative maintenance program has one goal: extend the working life of your product.

Installation Services

We offer installation and support services to ensure maximum product lifetime and peak product performance.